IR Temperature Sensors

PSC-CS Compact Sensor

Compact, low cost IR thermometer packed with powerful features and value

Features

• Wide temperature range: -40°C to 1030°C
• Response time: 25 ms
• Optical Resolution 15:1
• Green LED alarm indication, aiming support, self-diagnostic
• Ambient temperature rating up to 80°C without cooling
• Scalable analog output: 0-10 V or 0-5 V + alarm output or digital output
• USB programming interface, direct serial 9.6 kBaud
  interface
• Wide power range 5-7, 12-28 V DC

PSC Small Smart Sensorfast

Precise noncontact temperature measurement from -40 to 600°C

Features

• Precise non contact temperature measurement from -40 to 600°C
•  Fast analog output (0/4 – 20 mA, 0 – 5/10 V) with  smart real time data processing
• Instant digital 0/10 V output with a response time of 4 ms (50 % signal)
• Continuous process monitoring with an unchoppered sensor system
  Note: Conventional fast pyroelectrical infrared  sensors with mechanical chopper see processes
  only part of the time
• Easy to assemble in multiple arrays for line scanning
  of small and fast objects (hot spot detection) using a
  RS485 bus communication
• Rugged up to 130°C ambient temperature without
  cooling

Two-Color Pyrometer Metis MQ11 and MQ22

Two-Color- or Ratio- Pyrometers are typical names for pyrometers which measure temperatures from the ratio of radiation signals of two adjacent wavelengths as opposed to measuring the absolute intensity like single wavelength units do. The advantages for customers are the following:

• Gray bodies, i.e., targets with the same emissivity on both wavelengths, can be measured without emissivity setting.
• There is automatic compensation for dust, smoke or a dirty viewing window between pyrometer and target.
• Temperature errors are minimized if the target is too small or moving and the field of measurement can’t be completely covered.

Metis Two-Color Pyrometers have universal applications, which means that they can also be used as two-color pyrometers as well as single wavelength pyrometers. In single wavelength mode, customers have the choice of deriving the analog output signal from shorter or longer wavelengths, or both. Using digital communication these temperature measurement results can be recorded and compared, to determine quickly whether the target is a „gray body“ radiator or not.

DT-40L / DT-40G / DT-40F Pyrometer Series

Self Contained, 2 Wire Infrared Temperature Sensors

• Digital 2-wire loop powered, self contained Pyrometer
• For use with a wide array of applications
• Selection of temperature ranges from -40°C to 1400°C
• Integrated USB interface for sensor parameter settings
• Built-in peak picker
• Robust stainless steel housing

The Innovative design of Process Sensors Models; DT-40L, DT-40G and DT-40F with digital technology, are compact, rugged and based on simplicity of installation.

Typical Applications:

• Glass and ceramics
• Ovens and dryers
• Thermoforming
• Aggregate, powders and organics
• Paper, packaging and food
• Textiles, rubber and plastics  >100 mils
• Furnace applications

DSF-30NG/ DSF-34NG Pyrometer Series

Fiber Optic Pyrometer for Glass Industry

• Wide Temperature range from 600°C to 1800°C
• Loop-powered sensor with 4-20mA output (DSF-30NG)
• Simple installation and operation
• High accuracy
• Robust air purge design for maintenance-free operation
• Digital RS485 communication (DSF-34NG)
• Integrated peak picker

The digital pyrometers DSF-30NG and DSF-34NG are
especially designed for applications in the glass industry. These pyrometers are ideal for temperature measurement in glass tanks, forehearths and feeders.