IR Sensors

PSC-CS Compact Sensor

Compact, low cost IR thermometer packed with powerful features and value

Features

• Wide temperature range: -40°C to 1030°C
• Response time: 25 ms
• Optical Resolution 15:1
• Green LED alarm indication, aiming support, self-diagnostic
• Ambient temperature rating up to 80°C without cooling
• Scalable analog output: 0-10 V or 0-5 V + alarm output or digital output
• USB programming interface, direct serial 9.6 kBaud
  interface
• Wide power range 5-7, 12-28 V DC

PSC Small Smart Sensorfast

Precise noncontact temperature measurement from -40 to 600°C

Features

• Precise non contact temperature measurement from -40 to 600°C
•  Fast analog output (0/4 – 20 mA, 0 – 5/10 V) with  smart real time data processing
• Instant digital 0/10 V output with a response time of 4 ms (50 % signal)
• Continuous process monitoring with an unchoppered sensor system
  Note: Conventional fast pyroelectrical infrared  sensors with mechanical chopper see processes
  only part of the time
• Easy to assemble in multiple arrays for line scanning
  of small and fast objects (hot spot detection) using a
  RS485 bus communication
• Rugged up to 130°C ambient temperature without
  cooling

Two-Color Pyrometer Metis MQ11 and MQ22

Two-Color- or Ratio- Pyrometers are typical names for pyrometers which measure temperatures from the ratio of radiation signals of two adjacent wavelengths as opposed to measuring the absolute intensity like single wavelength units do. The advantages for customers are the following:

• Gray bodies, i.e., targets with the same emissivity on both wavelengths, can be measured without emissivity setting.
• There is automatic compensation for dust, smoke or a dirty viewing window between pyrometer and target.
• Temperature errors are minimized if the target is too small or moving and the field of measurement can’t be completely covered.

Metis Two-Color Pyrometers have universal applications, which means that they can also be used as two-color pyrometers as well as single wavelength pyrometers. In single wavelength mode, customers have the choice of deriving the analog output signal from shorter or longer wavelengths, or both. Using digital communication these temperature measurement results can be recorded and compared, to determine quickly whether the target is a „gray body“ radiator or not.

DT-40L / DT-40G / DT-40F Pyrometer Series

Self Contained, 2 Wire Infrared Temperature Sensors

• Digital 2-wire loop powered, self contained Pyrometer
• For use with a wide array of applications
• Selection of temperature ranges from -40°C to 1400°C
• Integrated USB interface for sensor parameter settings
• Built-in peak picker
• Robust stainless steel housing

The Innovative design of Process Sensors Models; DT-40L, DT-40G and DT-40F with digital technology, are compact, rugged and based on simplicity of installation.

Typical Applications:

• Glass and ceramics
• Ovens and dryers
• Thermoforming
• Aggregate, powders and organics
• Paper, packaging and food
• Textiles, rubber and plastics  >100 mils
• Furnace applications

DSF-30NG/ DSF-34NG Pyrometer Series

Fiber Optic Pyrometer for Glass Industry

• Wide Temperature range from 600°C to 1800°C
• Loop-powered sensor with 4-20mA output (DSF-30NG)
• Simple installation and operation
• High accuracy
• Robust air purge design for maintenance-free operation
• Digital RS485 communication (DSF-34NG)
• Integrated peak picker

The digital pyrometers DSF-30NG and DSF-34NG are
especially designed for applications in the glass industry. These pyrometers are ideal for temperature measurement in glass tanks, forehearths and feeders.

Professional Infrared Video Thermometers with TFT color LCD display & Imager Video format

Typical Application areas :

• Plant/General Maintenance
• Electrical
• HVAC
• Bulk Material Conveyors
• Paper Production
• Wood, Gypsum, Brick
• Textiles
• Rubber, Powders

PSC PTLST-20-1M/2M

Transportable RH and Temperature Calibration Laboratory

A Portable Telescopic, Laser Sight Thermometer for demanding applications

• Temperature ranges from 725 – 3252°F (385 – 1800°C)
• High optical resolution up to 300:1
• Precise aiming with dual laser and scope sighting
• Adjustable emissivity from 0.100 – 1.000
• Short wavelength spectral responses – minimizes
  temperature errors due to changes in product emissivity
• MAX/MIN function and audible and visible HIGH-/LOW-alarm
• USB interface, PSC Connect RSoftware
• Data logger for 2000 measured values

PSC Portable Laser Sight Thermometer

Infrared thermometer with crosshair laser
sighting – the alternative to thermal imagers

The infrared PSC PLST supports the professional noncontact temperature measurement of objects as small as 1 mm in a temperature range between -35°C and
+900°C. This thermometer can be used in characteristic
applications like preventive maintenance, quality management, research and development and electronic design. The precision of the crosshair laser sighting indicates the spot size at any distance with absolute exactness. The highquality optical performance is a
distinguishing feature of the PLST.

Features

• The new performance standard of infrared thermometers: detecting spot sizes as small as 1 mm for the measurement of finest details
• crosshair laser sighting marks real spot size at any distance
• temperature range from -35° to +900°C
• optical resolution 75:1
• thermocouple input
• USB interface and graphic software with oscilloscope
  function for 20 data per second
• flip display switches into most convenient viewing position

High Performance, Hand-held Digital Infrared Thermometer

• Sharp adjustable focus with precision optics
• High accuracy/repeatability
• Measures wide temperature range 1112°F to 5432°F
  (600° to 3000°C)
• Read temperature in viewfinder or on large LCD display
• Communication software (optional)
• Data logging up to 1000 temperature readings
• Built-in close focus lens attachments for ultra small spots

Typical Applications:

• Steel/Foundry
• Ceramics
• Molten Glass
• Graphite
• Composites
• Semiconductors

Calibration Source BBS400

Features 

• Radiator temperature up to 400⁰C
• Excellent homogeneity, precision & long-term stability
• Compact and rugged design
• Perfect for calibrating and testing infrared sensors

BBS1200 Compact blackbody calibration source

Model: BBS1200 Compact

Temperature Range: 50° to 1200°C (122° to 2192°F)
Accuracy: +/- 0.2 C to NIST Standard
Temperature Resolution: 0.1°C
Stability Short/Long-Term: +/- 0.1 C (+/- 0.2C)
Variable Aperture Sizes (8): 1”, 0.6”, 0.4, 0.2, 0.1, 0.125, .050 & .025”
Emissivity: ˃ 0.99

Blackbody Calibration Source

Process Sensors Model BBS1500 blackbody calibration source features a high emissivity of +0.99, fast heat up time and offers a 1” (25mm) aperture.

Delivering a temperature range from 500°C to 1500°C,
simply adjust the set point on the precision digital PID
controller to any temperature within the specified
temperature range.

Upon reaching the user selectable set point temperature, the model BBS1500 will stabilize and produce a temperature reading to within 1°C,assuring high accuracy
calibration of non-contact infrared thermometers, thermal
imaging camera systems, focal plane array detectors, heat
fl ux meters, spectrophotometers, and optical devices.

Blackbody Calibration Source

Process Sensors blackbody calibration source Model BBS 1700 features a high emissivity of +0.99 and a 1” ( 25mm) aperture.

Delivering a temperature range from 300°C to 1700°C,
simply adjust the set point on the precision digital PID controller to any temperature within the specified
temperature range.

Delivering a temperature range from 300°C to 1700°C,
simply adjust the set point on the precision digital PID controller to any temperature within the specified temperature range.