Our Products ::::::

 
 
 

AccuStar® II/DAS 20
  Dual Axis Clinometer
 
AccuStar-II-DAS-20
Request For Quote
 



AccuStar® II/DAS-20 combines the function of two clinometers in one package. The unique dome shaped
design features a capacitance based sensor which produces output signals directly proportional to the relative tilt in two axes.

Designed for high volume applications, AccuStar® II/DAS-20 is priced to compete with much less capable mercury switches and other low cost level sensors.

There are four output connections providing a choice of ratiometric, pulse width modulation (PWM) digital output. A mating connector (sold separately) provides the user with an easy plug-in connection. Null and scale factor are ajustable.
 

Features
New microprocessor-based electronics
Two clinometers in one package
Adaptable design DC powered
Ratiometric and PW digital output in one model
Trimmable outputs
 
Applications
Platform leveling
Measure pitch and roll
Tip over protection for manlifts
Automatic leveling systems
Wheel alignment
Electrical
  Voltage Supply (nominal) 9 VDC
Voltage Supply Range ......              Regulated 5.0 to 15.0 VDC
Current ..........................10 mA
Analog Output
Scale Factor* @ 9 VDC 100                           mV/degree ±10%
Load Resistance (min) .. 10K                                          Ohms
Null Output ....................... 1/2 supply voltage ±10%
Pulse Width Output
Null ................................. 50%                                   (duty cycle)
Scale Factor ................... 0.7% /                            degree (nominal)
Duty Cycle ..................... t2 /          (t1+ t2) t1 and t2 varies from
                            0.2 to 0.7 msec
Frequency .......................... 100                                    Hz nominal
 

Physically the sensor is composed of two hermetically sealed domes spaced about 1/8" apart. The lower, polyester plastic dome has 4 capacitive plates while the aluminum, upper dome acts as a ground. A fluid with a high dielectric constant is sealed within the dome sandwich, leaving an air bubble space about the size of a quarter. The bubble is centered at level position and will move from one side to the other as the device is tilted.
AccuStar-II-DAS-20-dg

Environmental
  Temperature Range
Operating
...................... -20° to 65°C
Storage
.......................... -55° to 65°C
Temperature
Coefficient of Null
................. 0.01°/°C
Temperature Coefficient
of Scale Factor
...............0.10%/°C
Performance Specifications
  Range ........................ ±20°
Threshold / Resolution .. 0.01
Linearity
Null to 10° ................ ±0.2°
10° to 12° ................ ±2.5%
12° to 15° .................. ±3.0%
15 to 20° ............. Monotonic
Null Repeatability.....±0.1
Frequency Response (-3db)      ......... 0.25 Hz (0.50 Hz
                                                available, consult factory)
 

       
 
PRESSURE : | Pressure Sensors | Differential Pressure Transmitters | Digital Differential Pressure Gauges | IS Pressure Transmitters  |
 HUMIDITY : | Humidity Sensors | Humidity + Temperature Transmitters | High Temp. Humidity + Temperature Transmitters |Industrial Humidity + Temp. Transmitters | Handheld Instruments Calibration  |
AIR VELOCITY TRANSMITTERS :  | Air velocity Transmitters | Industrial Air velocity Transmitters Airflow Visualiser |
MOISTURE TRANSMITTER :  Moisture in Oil Transmitter | Dewpoint Transmitters | Moisture in Tobacco / Tea Leaf | Moisture in Wood Particles | Moisture in Food Products |
LVDT AND TILT SENSORS :    |  LVDT  |   RVDT  | Tilt Sensors |
DATA LOGGERS  :   Low Cost Humidity and Temp. Loggers  |  Wireless Data Loggers  |  16 Channels Data Loggers |

CO2 SENSORS  :    CO2 Transmitters  |       PRESSURE SWITCHES       |       FORCE SENSORS      |

Copyright © 2008 - 2009 Jupiter Electronics. All Rights Reserved.

BEST VIEW : 1024 X 768 Pixels

eNabled by : NEW AGE